KeeGuard roof edge protection system components

KeeGuard system components

The KeeGuard roof edge protection system is made of galvanised steel fittings and tube, using the Kee Klamp method of connection. A - KeeGuard PVC end, B - Size 8 tube, C - Upright assembly, D - 90 degree elbow, E - Size 8 tube.

KeeGuard
components breakdown

Base foot
Base foot
This unique component provides support to the system and allows the system to be set at 90º or raked back at 11º.
Saddle clamp
Saddle clamp
This open cup fitting provides the method of linking the horizontal main rail tubes to the support legs.
90º elbow
90º elbow
This provides the means of dealing with corners and changes in level.
Adjustable side outlet tee elbow
Adjustable side outlet tee elbow
Used in pairs these components deal with angles 90º-180º and changes in level.
Three socket tee connector
Three socket tee connector
This component can be used in many different instances, for example, changes in level.
Straight coupling
Straight coupling
This component provides the method to link the horizontal main rail tubes.
Cantilever tube
Cantilever tube
This component provides the link between the counter weight and base foot.
Small cantilever tube
Small cantilever tube
Used in pairs at the end details these components provide the link between the counter weights and the cantilever tube via the two socket cross fitting.
Main rail tube
Main rail tube
Supplied in three sizes for convenience, these components provide the horizontal rails of the system.
Support leg
Support leg
The vertical support legs are produced in steel - 48.3mm external diameter.
Recycled PVC counter weight
Recycled PVC counter weight
This component provides the stability to the system.
Wall / ladder clamp
Wall / ladder clamp
This component provides the means to terminate the system against a façade or clamp the system to a cat ladder/structure where the stringer is a maximum of 70mm wide.
Collar
Collar
This component is inserted in the first slot of the recycled PVC counter weight.
Wall fixing
Wall fixing
The wall fixing is used in pairs in conjunction with a wall clamp.
Two socket cross
Two socket cross
This component is used where two recycled PVC counter weights need to be joined together to form a counter weight end detail.
Plastic cap
Plastic cap
This component is fitted to the top of the support leg to prevent water ingress.
Safety gate
Safety gate
Spring loaded, self-closing safety gate.


Product Guides

KeeGuard brochure

Read about the KeeGuard components, technical specs and see our installation tips.



Close-up on
KeeGuard components

Base fitting

Base fitting

The rubber boot at the base of the fitting is designed to protect your roof for years to come while providing additional grip on some surfaces.
Structural tubing

Structural tubing

Gator Tube is more rigid and up to 4-times more corrosive resistant than schedule 40 pipe. Made to last.
Counterbalance

Counterbalance

Made from solid recycled PVC, the counter-weights will be friendly to your roof and the environment.
Top post fitting

Top post fitting

Designed for ease of installation, this railing component allows the installer to set a complete 21' section of tube in place without cutting and measuring.
Full perimeter protection

Full perimeter protection

Unlike competitors, KeeGuard uses 21' horizontals to join together multiple posts. The result: a rigid, continuous railing that does not rely on any one connection. Engineered for safety.

Get a KeeGuard quote

Test

Interested in our KeeGuard system? Get in touch and receive a KeeGuard quote in no time.

Shopping Basket