KeeGuard Premium
For narrow roof spaces

Ideal for tight spaces

Suitable for spaces where solar panels or AC systems make roof navigation difficult.

No tripping hazards

Its compact weights overcome the trip hazard associated with traditional freestanding systems.

Non counter-weight system

Same KeeGuard quality with no counter weights. Does not damage your roof.

Quick and easy to install

Modular system allowing almost any configuration possible.

A compliant safety solution

KeeGuard Premium is tested in accordance with the EN 13374 standards.

What is KeeGuard Premium?


KeeGuard Premium is a modular free standing non counter weight system. The system has a smaller foot print than the Standard KeeGuard solution and is ideal for tight roof spaces, where panels, plant or other roof mounted equipment is installed.

KeeGuard Premium’s base weight assembly is 550mm square x 161mm deep with a maximum weight of 40kg, moulded from recycled PVC in two interlocking halves. Each base foot incorporates a comfortable carrying handle and slots for a toe board if required. The inter-locking design also allows the weights to be stacked for ease of storage and transport.



KeeGuard Premium
system photos

Solar panel maintenance

Solar panel maintenance

KeeGuard Premium weights installed on a roof with solar panels.
KeeGuard Premium weight

KeeGuard Premium weight

Made of recycled PVC, KeeGuard Premium weights are narrower than the regular KeeGuard ones.
Limited roof space

Limited roof space

KeeGuard Premium is suitable for roofs where walking space is limited.
Awkward spaces

Awkward spaces

KeeGuard Premium does not require counter weights, making it the perfect solution for awkward spaces.
KeeGuard system

KeeGuard system

KeeGuard Premium is as easy to install as our standard KeeGuard solution.

Close up on
KeeGuard Premium components

Recycled PVC base foot
Recycled PVC base foot
This unique component provides support to the system and allows the system to be set at 90º. Vertical support legs are inserted into the base foot and secured by tightening the collar.
Saddle clamp
Saddle clamp
This open cup fitting provides the method of linking the horizontal main rail tubes to the support legs.
90º elbow
90º elbow
This provides the means of dealing with corners and changes in level.
Collar (75-8)
Collar (75-8)
These components are inserted into the bottom half of the recycled PVC weight. They are held in position via the inserts and on completion of assembling the top half of the recycled PVC base via the nuts and bolts provided.
Straight coupling
Straight coupling
This component provides the method to link the horizontal main rail tubes.
Main rail tube
Main rail tube
Supplied in three sizes for convenience, these components provide the horizontal rails of the system.
Plastic cap
Plastic cap
This component is fitted to the top of the support leg to prevent water ingress.
Wall fixing
Wall fixing
The wall fixing is used in pairs in conjunction with a wall clamp.
Standard support leg
Standard support leg
This component allows for standard 90º installation. The Vertical Support Legs are produced in steel - 48.3mm external diameter.
Wall / ladder clamp
Wall / ladder clamp
This component provides the means to terminate the system against a façade or clamp the system to a cat ladder/structure where the stringer is a maximum of 70mm wide.
Adjustable side outlet tee elbow
Adjustable side outlet tee elbow
Used in pairs these components deal with angles 90º-180º and changes in level.
Three socket tee connector
Three socket tee connector
This component can be used in many different instances, for example, changes in level.
Safety gate
Safety gate
Spring loaded, self-closing safety gate.
Base foot
Base foot
This unique component provides support to the system and allows the system to be set at 90º or raked back at 11º. The Base Foot connects the Cantilever Tubes and Counter Weights.
Recycled PVC counter weight
Recycled PVC counter weight
This component provides the stability to the system.
Cantilever tube
Cantilever tube
This component provides the link between the counter weight and base foot.
Collar
Collar
This component is inserted in the first slot of the recycled PVC counter weight.
Two socket cross
Two socket cross
This component is used where two recycled PVC counter weights need to be joined together to form a counter weight end detail.

Get a KeeGuard quote

Test

Interested in our KeeGuard system? Get in touch and receive a KeeGuard quote in no time.

Shopping Basket