Metal roof guardrail systems
Roof Edge Protection for Standing Seam & Metal Roofs
Working on metal roofs presents a unique set of challenges. Standing seams, trapezoidal profiles, and restrictions around roof penetration mean that standard guardrail systems are often unsuitable or impractical.
Kee Guard Top Fix is a purpose-built metal roof guardrail designed specifically for standing seam and profiled metal roofs. It delivers compliant roof edge protection without drilling, welding, or compromising the roof structure.
By clamping directly onto standing seams or distributing load safely across profiled sheets, the system provides reliable, long-term protection while preserving roof integrity. It is widely used across industrial facilities, warehouses, manufacturing sites, and solar installations where safe, permanent access is required.
Non-Penetrative Installation
Clamps to standing seams or sits on profiled sheets without drilling.
Designed for Metal Roofs
Engineered specifically for standing seam and trapezoidal profiles.
Fast, Modular Setup
Quick to Install with minimal disruption to your site.
Adaptable System Design
Configures easily to suit different roof layouts and profiles.
Designed Specifically for Metal & Standing Seam Roofs
Metal roofs require guardrails that work with the structure, not against it. Smooth surfaces, varying profiles, and limited fixing options all influence how a roof guardrail system should be designed.
Kee Guard Top Fix has been developed to integrate directly with standing seam and profiled metal roofs. Rather than forcing a generic solution, it adapts to the roof type, ensuring a secure and compliant installation without introducing risk.
This makes it particularly suitable for buildings where maintaining roof integrity is critical, such as warehouses, manufacturing facilities, and commercial properties with long-term maintenance requirements.
Non-Penetrative Roof Guardrail for Standing Seam Roofs
Avoiding roof penetration is often a key requirement when working on metal roofs. Drilling into the structure can compromise waterproofing, lead to corrosion, and invalidate manufacturer warranties.
Kee Guard Top Fix eliminates the risk. For standing seam roofs, the system clamps directly to the seams, creating a secure fixing point without damaging the roof. For other metal profiles, loads are safely distributed across the structure using engineered base solutions.
The result is a roof guardrail that delivers safety without introducing additional risk to the building.
Wind Uplift Considerations for Metal Roof Edge Protection
Metal roofs are often more exposed to wind forces than other roof types, making wind uplift a critical factor when specifying a metal roof guardrail.
Kee Guard systems are designed with these conditions in mind. Each installation is configured based on roof type, building height, and environmental exposure to ensure stability under expected wind loads.
This ensures that your roof guardrail system remains secure and compliant, even in more demanding or exposed environments such as large industrial buildings or coastal locations.
Fixed vs Freestanding Roof Guardrail for Metal Roofs
Selecting the right type of roof guardrail system depends on your roof design and constraints.
Freestanding systems are typically used where penetration is not permitted, and sufficient space is available for counterweights. However, on standing seam roofs, a fixed, non-penetrative approach often provides a more efficient solution.
By clamping directly to the seams, Kee Guard Top Fix reduces system footprint while maintaining strength and compliance. This makes it particularly effective for roofs with limited space or complex layouts.
A Safer Approach to Roof Edge Protection
Guardrails provide collective fall protection, meaning workers are protected at all times without relying on PPE or user behaviour.
For maintenance teams, contractors, and facilities management, a roof guardrail offers a simple, reliable solution that reduces risk and supports compliance with working at height regulations.
Built for Industrial and Commercial Applications
Kee Guard Top Fix is used across a wide range of industries where safe roof access is essential.
From warehouses and manufacturing plants to solar panel installations and commercial buildings, this metal roof guardrail provides long-term protection that works with the structure of the building.
Expert Support for Metal Roof Projects
Every roof is different, and selective the right roof guardrail system requires an understanding of both the structure and the risks involved.
Our team provides practical guidance to help you choose the right solution for your project, ensuring compliance, performance, and long-term reliability without unnecessary complexity.
Or call 0121 281 5584
When it comes to installation,
You've got options
Supply-only
KeeGuard requires no welding or fabrication on site, which means that you will not waste time or money on laborious installation. If you ever get stuck, there are plenty of resources available on our website to help you with the assembly. Alternatively, if you need assistance with our products, we are happy to help over the phone, by email or chat.
Site survey
We understand that sometimes it can be hard to choose the correct fall protection solution or configure a system correctly. If you are not familiar with our products or simply need one of our team members visit your site, then we'd love to help. Our fall protection specialists will help you identify hazards, answer compliance questions and advise you on solutions. Get in touch to book yours today.
Full installation
If you are looking for a complete turn-key service, look no further. Our team can: conduct a site survey, advise on suitable fall protection solutions, install the system for you according to the manufacturer’s specification and answer any of your questions about our products and services that you might have in the meantime. We are here for you every step of the way.
Designed and tested to
exceed industry standards
We want you to be safe - we can prove it.
KeeGuard for corrugated metal roofs was designed to meet global standards and
has been tested to prove compliance with
your local and national codes.
BS 13700:2021 EN 13374 Class A EN ISO 14122 Part 3 NF E85-003 EN 1991-1-4 BS 6399 : Part 2 Code of Practice for Wind Load
Frequently asked questions
What types of metal roofs is Kee Guard Top Fix suitable for?
Kee Guard Top Fix is designed specifically for standing seam and profiled metal roofs, including trapezoidal and corrugated sheets. It can be installed on roof pitches up to 45ï‚°, making it suitable for a wide range of industrial and commercial buildings.
Is Kee Guard Top Fix non-penetrative for metal roofs?
Yes. For standing seam roofs, the system uses a non-penetrative clamp that secures directly to the seam without drilling. For profiled metal roofs, watertight fixings are used to maintain roof integrity and prevent leaks.
Does this metal roof guardrail comply with UK safety standards?
Yes, Kee Guard Top Fix is fully tested and compliant with key standards including BS EN 14122-3, EN 13374 Class A, and BS 13700, ensuring reliable and up-to-date roof edge protection.
How is the guardrail fixed to different metal roof profiles?
The system uses pre-configured base plates designed to suit common fixing centres, including standing seam and trapezoidal profiles. This allows for a secure installation without the need for custom fabrication.
How quickly can a metal roof guardrail system be installed?
Kee Guard Top Fix is designed for fast installation using modular, pre-engineered components. With minimal tools required and no welding involved, installation time and on-site disruption are significantly reduced.
Can the system accommodate roof features like corners or level changes?
Yes, the system is highly adaptable. It can be configured around corners, ridges, valleys, and changes in level, and can also integrate with self-closing safety gates where required.
Is Kee Guard suitable for exposed or high-wind environments?
Yes, the system is designed to perform in exposed conditions. Configurations can be tailored based on wind load environments, making it suitable for large industrial roofs and open environments.
What industries typically use metal roof guardrail systems?
Kee Guard Top Fix is commonly used across warehouses, manufacturing facilities, industrial plants, and solar installations anywhere safe and compliant roof access is required.
Is Kee Guard available in different materials or finishes?
Yes, the system is available in galvanised steel and aluminium. The aluminium option is ideal for environments where weight or corrosion resistance is key consideration.
Why choose a guardrail instead of a harness system?
Guardrails provide collective fall protection, meaning workers are protected at all times without relying on PPE or training. This reduces risk, simplifies compliance, and improves safety across the site.
Get a KeeGuard quote
Interested in our KeeGuard system? Get in touch and receive a KeeGuard quote in no time.
Show Pricing
Option available in footer.
